SPECIALZIED FSR ENDURO 04-06 LINKAGE
SPECIALZIED FSR ENDURO 04-06 LINKAGE
34 in stock
Specialized FSR Enduro 04-06 linkage
New linkage to lift the BB, to give more pedal clearance and to give you more travel options. Short travel matches the standard 100mm travel but with a BB height of 12.9''. The longer travel gives you 130mm of travel and a BB height of 13.37''. These measurements were taken using the standard 100mm forks. Suitable only for the FSR Enduro 04-06 bikes.
IMPORTANT
To ensure you have the correct frame/bike to fit this linkage please check the following sizes. The gap between the linkage where it fits on the frame downtube is 41mm. The gap in the linkage where it fits on the rears stays is 75mm. The bearing centre to centre measurement is approx 107mm. This is greater than the distance for the FSR XC linkage which we no longer make or have any stock of. If you order the linkage we will email you to ensure it is the correct one for your bike
Available in 2 travel options of 100-130mm and the even longer travel 120-150mm.
Supplied with the link is a new shock reducer and bush and 4 fitted Enduro Max bearings.
** It has been brought to our attention that on some of the 04 frames, the large body (triad)shock will foul on the weld in the top of the hole that the shock goes through, when using the 100mm setting. We have fitted these some 04 frames with no problem, so we feel that it is due to the manufacturing tolerences of the frames and the thickness of the welds. There is no problem using the 130mm setting. If you purchase a link and this happens we will refund your money as long as you have not scratched the linkage.*** If you want to discuss this please contact ourselves